Paper and ribbons on hand
Kitchen → Paper & ribbons keeps count of your printer paper, and of the ink ribbons your impact printers use, so a printer never runs dry in the middle of service. Count once; from then on, everything your printers print is taken off automatically.
Start tracking a paper
Each type of paper your printers use appears as its own card:
- 3-1/8" thermal (80 mm): the common receipt and kitchen printer paper.
- 2-1/4" thermal (58 mm): narrow thermal rolls.
- 3" impact (76 mm): the paper for impact kitchen printers such as the Epson TM-U220. These printers strike through an ink ribbon instead of using heat-sensitive paper.
- Count the unopened rolls in storage.
- On the card, choose Count rolls and enter that number. For impact paper, also choose 1-ply or 2-ply. 2-ply carbonless rolls are shorter, so they run out sooner.
You don't count the rolls already in the printers. Half a roll is added for each printer on that paper, which is about what a loaded roll has left on average.
What the card shows
- Rolls on hand (≈): your count, minus what has printed since, plus anything you received. It is an estimate worked out from each ticket's length, so re-count now and then to keep it honest.
- Days left: rolls on hand divided by what you used per day over the last two weeks. It appears after your first full day of printing.
- Low: you are below your alert level.
Low-paper alerts
When a paper size drops below its alert level, everyone at the location who can order supplies gets an alert. The alert level is the paper you use in 10 days, plus a spare roll for each printer on that paper, and never less than 2 rolls. The spare rolls are there because a printer can't use another printer's roll: when its own roll runs out, it takes a whole one off the shelf. You can change the days, or turn alerts off, under the card's settings.
The alert stays at the top of the Paper page until you restock, and a reminder goes out once a day, around 9 AM your time, saying what's left. It starts the day after the first alert and stops when you restock, order or choose Dismiss. Remind me in 2 days pauses it.
Ordering that paper from OrderUp closes the alert, whichever button you order from: the alert, the paper's card, or the POS or Manager app. While an order only waits for approval, the alert stays open, and the reminder says the order is waiting, for example "SO-12 is waiting for approval", instead of telling you to restock. If you're still low when an order of that paper ends, and no alert for it is open, the alert comes back right away and says why: the order was declined, withdrawn, expired or cancelled, its invoice was voided or refunded, or it was delivered and didn't bring you above the alert level.
If you sign in on the POS while an alert is open, it opens on the screen once, and a Paper running low pill stays in the top bar until the alert closes. Tap the pill to see which paper, how much is left and where to restock.
Who can order, approve and get alerts
Order Supplies decides who can order and who gets the alerts, under Staff Management → User Settings, in the Manager list. Owners and admins always have it. Tick it for a job to let that job order and get the alerts, and untick it to stop them. It starts on for the jobs marked as managers.
Who approves an order before it is invoiced is picked by name on this page, under Settings → Who can approve orders. Owners and admins always can. An owner or admin chooses Change approvers, ticks the people who may approve, and chooses Save; every change is kept in its history. The same section lists who can order but not approve (their orders wait for an approver). See Approving orders.
A job below manager also needs a Management sign-in and Restaurant Operations unlocked under Management Features to find this page. They can read it and order (or approve, when they're on the approver list), while counting rolls, recording what arrived and changing settings stay with managers.
When paper arrives
Choose Received rolls and enter how many you put away. If that takes you back above the alert level, the alert closes.
Different roll sizes
The page assumes the common rolls: 230 ft on 80 mm, 85 ft on 58 mm, and 150 ft (1-ply) or 90 ft (2-ply) on 76 mm. If your box says something else, set the roll length in the card's settings so the days left stay accurate.
If a card says a printer "is an impact printer set to 80 mm paper", it is counted on the impact paper card anyway. Set that printer's paper width to 76 mm under Kitchen → Printers so its tickets print at the right width.
Impact printer ribbons
If you have an impact printer, an Impact printer ribbons card appears. A ribbon fades as it prints, and a faded ribbon prints kitchen tickets that are hard to read.
- Count the unopened ribbons and choose Count ribbons. Half a ribbon is added for each impact printer.
- Choose which ribbon you use: Black/red (ERC-38 B/R), which prints the red alert lines on kitchen tickets, or Black only (ERC-38 B).
Wear is worked out from the characters each ticket prints, using Epson's rated ribbon life. The card shows about how often you go through a ribbon and how many days you have left. You get the same alert, settings and Received ribbons as for paper, with a spare ribbon kept for each impact printer.
Order paper or ribbons from OrderUp
When OrderUp sells the paper you use, its card and its low-paper alert show Order from OrderUp with the price of a case. For impact paper you're offered the ply you use. Ribbons are ordered by the box, in the type you counted.
When OrderUp sells more than one pack of your paper (or your ribbons), for example a case of 24 rolls and a case of 50, you choose the pack: each one shows its price and its price per roll, such as Case of 50 rolls · $64.99 · $1.30 per roll. The pack with the lowest price per roll is chosen to start with. Choose another and the total and the sales tax change to match it. An order of the same paper already on its way counts whatever its pack size. When only one pack is sold, there is nothing to choose.
- Choose how many cases you want. You'll see the sales tax, the total and the address it ships to (your location's address under Settings → Location).
- If you can approve orders (an owner, an admin, or someone on the approver list under Settings), choose Place order: an invoice is created right away and emailed to your OrderUp billing contact. Otherwise choose Send order. If it needs approval, it waits for an approver, and nothing is invoiced or charged until one approves it (see Approving orders). If your location approves orders automatically and it's within the limit, it's placed and invoiced at once (see Approve automatically under a limit). Either way you can add a Note, up to 500 characters, such as why you need it now; an approver sees it on a waiting order. The note box appears once your location has ordered from OrderUp at least once, so a location's very first order has none.
- Pay the invoice with Pay now, or let your bank autopay pay it if you have it set up. Paper ships once the invoice is paid, usually within 2–5 business days, and shipping is included.
The order then appears under Orders from OrderUp, with its tracking once it ships. When the boxes arrive, choose Received and the rolls are added to your count. If you don't, they're added automatically a few days after the expected delivery date. When no delivery date was given, the expected date is the pack's longest delivery time after it shipped.
If an order of the same paper is already on its way, you're asked to confirm before placing another. An order still waiting for approval counts, and is named as one, for example "SO-12 (waiting for approval)".
If the price, the sales tax or the pack changed since you opened the order window, or someone ordered the same paper on the POS or in the Manager app in the meantime, the order isn't placed. The window says why and shows the new figures, switches to the pack that's on offer now, or asks you to confirm the order that's already on its way. Place order comes back once the new figures are on screen. While the price of a pack you just chose is loading, the last price stays on screen, greyed out, and can't be ordered.
Approving orders
An order from someone who can't approve it waits under Orders from OrderUp as Waiting for approval, with who asked for it, when, where (for example "on the POS (Host)" or "in the Manager app") and their note, if they left one. Nothing is invoiced or charged while it waits, and the low-paper alert stays open.
- Approve: confirm the order number, item, cases and total. The invoice is created at the price shown when the order was requested and emailed to your billing contact, with a copy to the person who asked. Then it goes on as any other order: it ships once the invoice is paid. You can add a note for the record.
- Decline: say why, in 3 to 500 characters. The order is cancelled and the person who asked sees your reason.
- Withdraw: the person who asked can take the order back while it waits, with a note if they like.
Nobody can approve or decline an order they asked for themselves, wherever they asked from: the same person on the web, in the Manager app and at the till is one person. Someone who can approve doesn't need to: their own orders are invoiced as soon as they place them. An order that waits more than 7 days expires; order again if you still need it.
Approvers get a push in the OrderUp Manager app within a few minutes of an order starting to wait, and again once a day while it waits, and see a note at the top of the Paper page saying how many orders wait for them. They also get an email when an order starts waiting, and another the day before it expires. It shows the location, the item, the cases, the total, who asked and their note. Review order opens the order on the Paper page after you sign in. You approve or decline it there, never from the email itself. Owners and admins get it at their account email; others who can approve get it at their account email, or at the email on their employee record. Nobody is emailed about their own request. The person who asked gets a push when the order is approved, declined or expires.
The Dashboard also says how many supply orders wait for your approval, and the sidebar's Paper & ribbons entry shows the same count. Review order in the email opens the Paper page with that order highlighted and its record open. If the order is at another of your locations, the page says which, with a button to switch there.
If OrderUp stops selling a pack while an order of it waits, it can't be approved: you'll see "OrderUp stopped selling this pack after it was requested. Decline it and order what's on offer."
The person who asked is also emailed when their order is approved, declined (with the reason) or expires, if we have an email address for them. At the POS, the next time they sign in, they see their requests decided since they last signed in.
Approve automatically under a limit
An owner or admin can let routine orders through without waiting for an approver: under Paper & ribbons → Settings, "Orders up to $___ don't need approval", and optionally "…and up to $___ a month in total". It's off until you set it.
When someone who can't approve places an order whose total (with tax) is within the limit — and, with a monthly total, the orders approved automatically this month plus this one stay within it — the order is approved at once and its invoice goes to your billing contact, as if an approver had placed it. They see "Approved automatically (under your $150 limit). The invoice is on its way.", and the order's record says "Approved automatically: under the $150 limit set by Bruce Le". The month is your location's calendar month, and cancelled orders don't count. Anything over the limit waits for an approver as before.
Everyone who can see the Paper page sees the setting and who last changed it; only owners and admins can change it, and every change is kept in its history. To change it, choose Change under Settings at the bottom of the Paper page, enter the amounts and choose Save. Leave the first amount empty to turn it off.
Cancel an order, or report a problem
Before it's paid, the person who asked for an order, or anyone who can approve orders, can Cancel order and say why. Its invoice is voided, so it can't be paid, and a bank payment that was only scheduled is cancelled with it. If a payment is already on its way, you'll see "A payment … is already on its way, so the order can't be cancelled here. Ask OrderUp to cancel it."
Once it's paid but not bought yet, choose Request cancellation and say why. We don't buy it while your request is open. If we can still cancel it, we refund your payment and cancel it, and the person who asked is told. If we had already bought it, we'll tell you why we couldn't.
Once it's bought, it can't be cancelled. If something is wrong when it arrives, choose Report a problem within 30 days of delivery: it didn't arrive, it's damaged, it's short (say how many cases arrived), it's the wrong item, or something else (tell us what). We'll replace it, refund or credit you, and tell you how it was resolved. An order you said didn't arrive, or arrived short, closes with only what you said arrived. While we look into it, it stays open. Once we've resolved it, it closes on its own a few days after its expected delivery date: an order that didn't arrive adds nothing to your count and reads, for example, "Closed Nov 14: none of the 2 cases arrived, as reported Nov 10"; a short one adds only the cases you said came (when we resolve a short delivery, we add them right away). A replacement adds the rest when it arrives. If the boxes turn up after all, choose Received with what came before it closes.
When it arrives, Received asks how many cases came, all of them unless you say otherwise. Only what arrived is added to your count. If fewer came than you ordered, we're told automatically, the same as reporting it short. If nothing arrived at all, choose Nothing arrived? Report a problem instead in the same window: it opens Report a problem with Didn't arrive chosen. If someone already marked the order received with a different count, you're told it changed instead: reload to see what was recorded.
Following an order
Every order says what happens next, under its status. For example "Waiting for Bruce Le or Ana Lopez · expires Nov 15", "Next: pay INV-1042 (emailed to your billing contact). Ships once paid.", "Your autopay will pay INV-1042; ships once it clears.", "Ordered from our supplier · expected by Nov 12" or "On the way: UPS 1Z… · expected by Nov 12". A tracking number from UPS, FedEx, USPS or Amazon is a link to the carrier's tracking page.
The person who asked, and everyone who gets your low-paper alerts, get a push when an order:
- ships, with the carrier, the last 4 characters of the tracking number and when to expect it (the whole number and the tracking link are on the order, and in the email the person who asked and your billing contact also get);
- runs late: not shipped by the pack's usual delivery time, or past its delivery date once shipped. We're on it, and the push says when to expect it (not while you've asked to cancel it, or told us something is wrong with it);
- arrives, with how many rolls (or ribbons) were added to your count, and, when fewer cases came than you ordered, how many did ("1 of 2 cases arrived"). When you mark it received yourself, everyone else is told. An order closed because nothing arrived sends no push;
- is cancelled by OrderUp, with why, and whether your payment was refunded. The person who asked and your billing contact are emailed too.
Pushes we send on our own (running late, and the payment reminders below) wait for daytime where you are: 9 AM to 9 PM in your location's time zone (Settings → Location), or Eastern time if none is set.
An approved order that isn't paid gets a reminder push on days 3, 4 and 5 after its invoice, to the person who asked and to the people who can approve. It ships once the invoice is paid; if your bank autopay is set to pay it, there's no reminder. After 7 days unpaid it no longer keeps the low-paper alert quiet: if you're still low, the alert comes back and says the order is waiting for payment.
Order and approve from your phone or the POS
Ordering and approving work the same way in three places, with the same permissions:
- On the computer: Kitchen → Paper & ribbons in OrderUp Management, as described above.
- In the OrderUp Manager app: Paper & ribbons on the location's Overview. It shows the low-paper alerts, the orders waiting for approval (with Approve and Decline, or Withdraw on your own), the paper and ribbons you can order, and the location's recent orders. Tap an order to see everything about it, and a push about an order opens it.
- On the POS: Paper & ribbons under Manager Activities, and Order paper on the low-paper sheet. To place, approve or decline an order, you enter your own PIN when asked, even if you're already signed in on the till, so the record names who actually decided.
Every order's record
Each order keeps a record of every step: who asked for it, who approved, declined or withdrew it, when it was invoiced, paid, shipped and received, and any note or reason. Each step also says where it was taken: on the web, in the Manager app, on the POS with the till's name, or by OrderUp. On the Paper page, choose Activity under an order to see it; the Manager app and the POS show the same record, in the same words.
Only the business orders and approves its own supplies: OrderUp support can't order, approve, decline, withdraw or cancel an order for you, report a problem on your behalf, or change your automatic approval.